Junior device series is a group of sliding devices that are used for cutting at different angles and sizes. These devices are supplied by mollen in two types of A and B with one year of unconditional warranty. The device we are about to introduce is an A type that its saw works electrically in four directions of left, right, up and down. Some of the specifications of this device is the same as other sliding machines, such as, being equipped with a clamp for better restraining of the work piece, being equipped with a rip fence for accurate adjustment of the bevel behind the saw and of course, wagon table with shoulder lock in measurement of 3200*415/3800*435 mm. it is necessary to mention that it is possible to mount a telescope hood on this device which is an option that would be done according to customer opinion.
There is a short video of cutting operation by this device in this page to help you to choose wisely the exact product of your need. In addition, there is a table of this devices specifications that its most important feature is the 7.5 HP of the device. The rest of the specifications are almost as the same of the other products.
Junior device series is a group of sliding devices that are used for cutting at different angles and sizes. These devices are supplied by mollen in two types of A and B with one year of unconditional warranty. The device we are about to introduce is a B type that its saw works manually in four directions of left, right, up and down with a digital display. The rest of the features of the device is the same as A type. These specifications are: being equipped with a clamp for better restraining of the work piece, being equipped with a rip fence for accurate adjustment of the bevel behind the saw and of course, wagon table with shoulder lock in measurement of 3200*415/3800*435 mm. it is necessary to mention that it is possible to mount a telescope hood on this device which is an option that would be done according to customer opinion.
There is a short video of cutting operation by this device in this page to help you to choose wisely the exact product of your need. Also, there is a table of this devices specifications that its most important feature is the 7.5 HP of the device. The rest of the specifications are almost as the same of the other products.
Junior 3800a sliding device is a junior family device that is supplied to the wood cutting industry with one year of unconditional warranty by MOLLEN. Junior machine family appellation is the main saw power with 7.5 HP max. the other options of this device is the same as other devices that MOLLEN supplies, such as angular ability, power and speed of the line saw.
Junior3800 devices are released in two types of A and B. the A type which the same device it is, its saw works electrically in four direction of left, right, up and down. According to customers opinion it is possible to mount a telescope hood on this device. Wagon table with shoulder lock, a clamp for restraining work piece and a rip fence for better adjustment of the bevel saw are the properties of this device.
Other technical specifications of the device are gathered in a table in this page. There is a short video which shows how this device operate to help you at better understanding of the device specifications.
Junior 3800b sliding device is a type B junior 3800 family device. It has the same specifications of its A type sibling such as the main saw power of 7.5 HP, speed and power the main saw and the line saw etc. the only difference of this device from its B type sibling is its manual saw in left, right, up and down direction and being equipped with a digital display. Other specifications are the same, such as being equipped with a clamp for better restraining of work piece, wagon table with a lock shoulder, being equipped with a rip fence in order to adjust the bevel behind the saw and having a wagon table with measurement of 3800*435/3200*415 mm. according to customers opinion a telescope hood could be mounted on this device.
There is a short video as all the other devices supplied by MOLLEN to show the functionality of the device in order to better introduction of it. All the specification of the machine has been gathered in a table in this page to help you to choose according to your needs.
Master series sliding is one of the most equipped and enhanced machines which is disturbed by MOLLEN. Master 3200 sliding machine is equipped with a digital control panel to adjust saws angles. Ruler behind the saw handle is completely operable and servo motor that drives the CNC, gives the machine locating accuracy to 0.01 millimeter. Perfect assembly, powerful body structure and machine resistance present most accurate and fastest cutting of work pieces. The machine has memory to save cutting programs in order to give consumers the advantage of switching between the programs without time wasting; resulting more speed and efficiency.
In order to achieve a better understanding about the functionality of the machine a characteristic table has been provided.
Master 3800 sliding is another machine supplied to the domestic and foreign wood industry market by MOLLEN. Master intelligent sliding machine is one of the most equipped and advanced devices that it’s high technical specifications, design, resistant body structure, and it’s way of automation, made it a sufficient choice for modern companies of wood manufacturing. Master 3800 is equipped with a digital control panel to give machines the orders and settings of cutting functions by it, that this functions is showed on a digital display which is assembled on the device. On this display, the angle degree of saw will be showed, in order to give consumers a better undesrandig of cutting process. The memory of device, is able to save multiple programs simultaneously that help the device to switch between different type of cutting process without any waste of time that result in more speed and efficiency of process. Completely operable and CNC ruler behind the saw and also, a clamp for better restraining the work piece are another features of this device.
We recommend you to visit the characteristic table In order to gain a better understanding about the this device.
Phantom sliding is a state-of-the-art device equipped with the most advanced technologies used in wood cutting industry which is supplied by MOLLEN with a year of warranty and can be bought in cash or on conditions. This sliding has a touch screen which provides ease of access to settings and choice of saw angle for consumers. To set the bevel behind the saw, system is supplied with servo motors that these motors bring more accuracy and speed so that pointing of the bevel behind the saw is 0.01 millimeter. This bevel is fully operable and could get orders in PLC to operate and control the process.
The memory that has been assembled on device could save different types of cutting process simultaneously so, you can perform a program or switch between programs without any time consuming or speed reduction. This feature leads to higher efficiency of work. The main ruler of the machine is digital. Top and bottom of the main and the line saw is controlled and adjusted electrically. Other technical specification of the machine and speed/power of main and line saw, and general specification such as electricity and weight of machine are listed in the table at left side of the page.
Phantom sliding is a state-of-the-art device equipped with the most advanced technologies used in wood cutting industry which is supplied by MOLLEN with a year of warranty and can be bought in cash or on conditions. This sliding has a touch screen which provides ease of access to settings and choice of saw angle for consumers. To set the bevel behind the saw, system is supplied with servo motors that these motors bring more accuracy and speed so that pointing of the bevel behind the saw is 0.01 millimeter. This bevel is fully operable and could get orders in PLC to operate and control the process.
The memory that has been assembled on device could save different types of cutting process simultaneously so, you can perform a program or switch between programs without any time consuming or speed reduction. This feature leads to higher efficiency of work. The main ruler of the machine is digital. Top and bottom of the main and the line saw is controlled and adjusted electrically. Other technical specification of the machine and speed/power of main and line saw, and general specification such as electricity and weight of machine are listed in the table at left side of the page.
The application of PS102 2200 sliding machine is to cut in woods in any measurement. This machine is equipped with digital display which facilitate the complex cutting process for user. The degree of the main saw and the line saw will be exhibited in the machines display and this advantage causes extraordinary accuracy for spotting cutting degrees.
The power and the speed of the main saw has values of 5.5 Hp and 4000/6000RPM, respectively. It means the main saw has the rotation ability from 4000 to 6000 rounds per minute. But these specifications for line saw would be 1 Hp, 9000RPM and 0 to 45 degree of angular ability.
We have gathered a table in order to introduce the other specification of the machine and its values, and a video for the better understanding of the function of the machine. We suggest you to check both to choose wisely.
Ps102 2200c sliding machine has all the properties of its equivalent machine: ps102 2200. the difference is the advantage of having wagon table. As you may know, the sliding machines are used in advanced cutting operations in any measurements and different degrees. Ps102 2200c machine facilitate the cutting operation and its complexities by using digital display. The degree of the main saw and the line saw is shown in display digitally and chooses the cutting degrees by digital spotting, precisely.
Features of the machine is shown in the table below. Some cases which worth to be mentioned would be: power and the speed of the main saw with values of 5.5 Hp and 4000 to 6000RPM, and the power and speed of line saw with values of 1 Hp and 9000RPM and the angular ability from 0 to 45 degree. In order to check the rest of the features, you can visit the table which had been mentioned earlier. In addition, we suggest you to watch the video which has been presented in this page to achieve a better understanding about the functionality of the machine.
Ps102 2800 is one of the sliding machines which MOLLEN company has been supplying to the industrial market with one year of unconditional warranty . These kind of modern cutting machines have digital display, which shows the main saw and the line saw angle, and it facilitate the cutting operation with the most accurate angle by using digital spotting. The digital display has made the complex cutting operation easy to adjust, change and perform.
In order to better restraining the MDF boards, this machine has a clamp and a rip fence that helps to fine tune the saws back bevel. 5.5 Hp and 4000 to 6000 RPM of speed with max diameter of 250-300 millimeter are the specifications of the main saw. One horsepower, 9000RPM and a max diameter of 120 millimeter are the line saw specifications. To be notified about the weight, electricity and other technical specifications of the machine, such as cutting angles, you can refer to the table where all the specifications of the machine are gathered.
Ps102 2800c is one of the ps cutting machines family as its sibling, ps102 2800. The only difference is the wagon table mounted on this machine with 2800*375mm as its measurement. This machine is used for any modern cutting operations at different measures and different angles as the other machines of the same type. It is equipped with digital display to facilitate the complex cutting operation. The mentioned display delivers cutting settings in plain and easy-to-understand language to the users. The main saw and the line sawS angle is shown in the display digitally. digital pointing makes cutting angles even more accurate.
The main saw power and speed are 5.5 HP and 4000 to 6000RPM, respectively. These values for the line saw would be 1 HP and 9000RPM. This machines angular ability is from 0 to 45 degree. Cutting height at 45 degree and 90 degree would be 55mm and 75mm, respectively.
Machines weight is 700kg and its electricity is 220v and 50hz; in order to choose the most perfect machine for your workplace these two specifications must be considered most carefully.
Ps103 3800 sliding machine is the most powerful one from ps family that mollen is supplying it to the industrial market of the country with one year of unconditional warranty. Since the machine is from ps family, naturally has the same specifications. It has common specifications in angular ability, speed, main saw and line saw diameter, cutting height at 45 and 90 degrees, digital display that shows the cutting angles of the main saw and the line saw and etc. the main difference is in the main saws power which in this machine is 7.5 HP, that means 2HP more than the other machines. It is necessary to mention that main engines power in single-phase models of company is 5.5 HP.
There are options that this machine provide for its users, such as a clamp for better restraining of the piece that is going to be worked on, wagon table with shoulder lock and rip fence for more accurate adjusting the bevel behind the saw. We have provided you a table with the specifications of the machine to buy the device more consciously. Also, there is a short video which shows the way the machine works.
Ps103 3200 is another sliding machine from ps family which mollen company has been supplying to the industrial market with one year of unconditional warranty. This machine has the same specifics of its family machines. Digital display with the ability to show the main saw and the line saw angle, and rip fence for adjusting the bevel behind the saw and the clamp to restrain the MDF board are the specifics worth to be mentioned. This machines difference from others is its 7.5 HP. Other specifications such as: speed, power of line saw, angular ability and cutting height in 45 and 90 degrees are the same as other machines.
This sliding machine has wagon table with shoulder lock in measurement of 3200*375 mm. the point needed to be mentioned is that in single-phase corporate models, the main saw power is 5.5 HP. Since considering all of the specifications of the machine might not be enough to introduce the product for Enthusiasts, we have provided a short video of machines functionality, which you can watch in this page.
دورکن را می توان همان دستگاه برش ام دی اف عنوان کرد که در صنعت ام دی اف کاربردهای فراوانی دارد. دور کن در کارگاه هایی که در زمینه مصنوعات چوبی فعالیت دارند دارای کاربرد بسیاری است.
وجود تیغ اره در دورکن باعث می شود تا امر برش در دور کن به بهترین و با کیفیت ترین شکل ممکن انجام شود از مهم ترین مزایایی استفاده از دورکن کاربری آسان و راندمان کاری بالا است که به همین دلیل از پر کاربردترین دستگاه ها در کارگاه های صنعت چوب می باشد.
دورکن از قطعاتی مانند ریل های راهنما، گونیای پشت و جلو، اره اصلی و ار خط زن تشکیل شده است که هرکدام از انها دارای کاربردهای خاصی هستند. به طور مثال استفاده از ریل های 2.30*3.80 در کشور ما رایج است همچنین باید دانست که این دستگاه می تواند دستی و اتوماتیک باشد از مهم ترین مواردی که در خصوص دورکن باید گفته شود این است که دور کن به کمک گونیاهایی که در آن ها به کار رفته است کار را دور می کنند.
برای کسب اطلاعات بیشتر از این دستگاه می توانید به سایت آمل برش مراجعه و از جزییات آن آگاهی کسب نمایید. قیمت دور کن بر اساس مسائل مختلفی در نظر گرفته می شود که می توان برای اطلاع از آنها با واحد فروش شرکت ارتباط برقرار نمایید.
