THOMAS

Junior device series is a group of sliding devices that are used for cutting at different angles and sizes. These devices are supplied by mollen in two types of A and B with one year of unconditional warranty. The device we are about to introduce is an A type that its saw works electrically in four directions of left, right, up and down. Some of the specifications of this device is the same as other sliding machines, such as, being equipped with a clamp for better restraining of the work piece, being equipped with a rip fence for accurate adjustment of the bevel behind the saw and of course, wagon table with shoulder lock in measurement of 3200*415/3800*435 mm. it is necessary to mention that it is possible to mount a telescope hood on this device which is an option that would be done according to customer opinion.

There is a short video of cutting operation by this device in this page to help you to choose wisely the exact product of your need. In addition, there is a table of this devices specifications that its most important feature is the 7.5 HP of the device. The rest of the specifications are almost as the same of the other products.

Phantom sliding is a state-of-the-art device equipped with the most advanced technologies used in wood cutting industry which is supplied by MOLLEN with a year of warranty and can be bought in cash or on conditions. This sliding has a touch screen which provides ease of access to settings and choice of saw angle for consumers. To set the bevel behind the saw, system is supplied with servo motors that these motors bring more accuracy and speed so that pointing of the bevel behind the saw is 0.01 millimeter. This bevel is fully operable and could get orders in PLC to operate and control the process.

The memory that has been assembled on device could save different types of cutting process simultaneously so, you can perform a program or switch between programs without any time consuming or speed reduction. This feature leads to higher efficiency of work. The main ruler of the machine is digital. Top and bottom of the main and the line saw is controlled and adjusted electrically. Other technical specification of the machine and speed/power of main and line saw, and general specification such as electricity and weight of machine are listed in the table at left side of the page.