Description
System enhances the quality of the workpiece and conveyor equipment of working life
Saws automatic system upside for additional cutting tape
System Checkout milling top and bottom edges using high speed engines 12,000 rpm
شناسه محصول : 51113110
System enhances the quality of the workpiece and conveyor equipment of working life
Saws automatic system upside for additional cutting tape
System Checkout milling top and bottom edges using high speed engines 12,000 rpm
| سرعت حرکت قطعه کار | 12/16/21 M/MIN |
|---|---|
| حداقل طول قطعه کار | 120MM |
| حداقل عرض قطعه کار | 80MM |
| ضخامت قطعه کار | 10-55MM |
| ضخامت نوار لبه | 0.4-3MM |
| عرض نوار لبه | 15-65MM |
| فشار هوای ورودی | 6-8 Bar |
| برق دستگاه | 380V 13.5KW |
| ابعاد دستگاه | ~5200*1100*1600 mm |
| وزن خالص دستگاه | ~2200 KG |
The MZ365s machine consists of 5 automatic stations, which are MDF-bonded during the passing process. All of the parameters that characterize this device, and the quality of its components from the Siemens brand, is a machine that delivers a better quality of workpiece at the lowest possible cost. Hence, the MZ360 has become a popular machine in the wood industry.
The high level of automation of the stations reduces human intervention to the lowest possible extent, resulting in a process of human exclusion. How to perform operations, such as Adjusting width from 1 MM to 2MM by PLC adjusting the conveyor to the switch between the three speeds of 12, 16 and 21 meters per minute, can be controlled through the control panel of the device, which is a touch screen by executing programs through the PLC. The preheating system is embedded on the device, the workpieces temperature will be increased to a degree that makes bonding the tape easier to work so that the precision is higher and the work surface reaches the highest possible quality.
In the final analysis, the workpiece passes through the paraffin parachute station, at which point a shimmering material is sprayed to the surface of the work to make the final polishing of the work as clean as possible. To better understand the performance and technical specifications of the device, you can use the table listed and watch the video recorded from the device.
The mz335s edge banding machine is similar to mz330 except that mz335s could adjust width between 1 to 2 MM by PLC controller
The pre-heating system upgrades the workpiece temperature to a certain level, which makes it easier and therefore better to adhere PVC strips to the workpiece. The upside-down saw can cut the extra strips attached to the piece by giving the specified value to the device program. This app can be controlled from the touch screen made by Taiwan Tech. At the end of the machine, the polishing part is a piece of work that removes the bursts and bumps on the piece from the previous operation and cleans it. It should be noted that all electronic components of the device are from the Siemens company from Germany.
The technical specifications of the machine are in the table and put together in order to choose the most suitable for you. From the specifications of the device can be noted the speed of 12/16/21m per minute. If reading these specifications is not enough to fully understand how the device operates, there is a video of how the device works. Since these devices are expensive, we recommend that you pay attention to the table and also watch the video of the product. Learn about the suitability of your device to meet your needs and practices.
The mz330 edge-pasted machine is another advanced family of mz edge-pasted provided by MOLLEN with an unconditional one-year warranty for the wood industry. This device is equipped with a lot of capabilities with four stations, which most of them will be described in the explanation.
The pre-heating system upgrades the workpiece temperature to a certain level, which makes it easier and therefore better to adhere PVC strips to the workpiece. The upside-down saw can cut the extra strips attached to the piece by giving the specified value to the device program. This app can be controlled from the touch screen made by Taiwan Tech. At the end of the machine, the polishing part is a piece of work that removes the bursts and bumps on the piece from the previous operation and cleans it. It should be noted that all electronic components of the device are from the Siemens company from Germany.
The technical specifications of the machine are in the table and put together in order to choose the most suitable for you. From the specifications of the device can be noted the speed of 12/16/21m per minute. If reading these specifications is not enough to fully understand how the device operates, there is a video of how the device works. Since these devices are expensive, we recommend that you pay attention to the table and also watch the video of the product. Learn about the suitability of your device to meet your needs and practices.