Amol Cutting Machines Corporation
CNC Machine Optima1325
The proposed product Mollen

This machine is the last and equipped model of CNC that we product. Optima has a high ability and accuracy for working. Optima also can carry 8 tools changer simultaneously that is very good for Mosaic designs and even f ... Optima1325

Machine lamination press production line Model HOT-PERSS

lamination press production line HOT-PERSS


short cycle hot press production line proposed in 5 main type named as D1, D2, SCL A, SCL B, SCL C. this hot press production line is in two custom size 1220*2440 mm and 1830*3660 mm. the hot press production lines usually have different numbers of jacks and various pressures that these production lines design and proposed by customer`s needings. below, we draw a table of specification for a hot press machine with 2800 tones pressure and its size is 1830*3660 mm.

Technical Specifications lamination press production line HOT-PERSS

Model HOT PRESS SHORT CYCLE
Board size 3660*1830 MM
Diameter master cylinder 360 MM
 master cylinder 12 
Pressure on MDF 2800 Ton
Pressure on each square centimeter 41 kg/cm
Master cylinder Brand ووشی (wuxi)
Diameter of lifting cylinder 125 MM
  lifting cylinder
Hydraulic system pressure MPA 25
The size of desk top 160*3850*2000 MM
Much lower desk 140*3850*2000 MM
Productive capacity of the machine  1200 Board
Heated fluid Oil
PLC control  (Mitsubishi)
Electrical items are used  (Schneider)
Electric solenoid valve   (ATOS)
Hydraulic Solenoid Valve   Atos
Weight of machine 80 Ton

 

Video clips for lamination press production line HOT-PERSS

LINKS : سایت مولن | دستگاه روکش MDF | دستگاه برش لیزری | دستگاه CNC | شهرک صنعتی بابکان
MOLLEN | Customers | News Archive | Activities | Products | About | Sharpening Machine | Contact

© CopyRight by MOLLEN | design & programming with PHP ™ Mr.Ghorbani 2012-2020 Amol
MOLLEN Machinery Co - Sharpening Machine
WEBMASTER : MOLLEN Co.